Priced from $12,495 + gst and freight, our ePump solar water pump in a box is a game changer.
The kitset includes a standalone, fully automatic solar pumping system that will pump water in even the remotest areas of your property. With this low voltage kitset you won’t need an electrician or builder for installation.
You will no longer need to spend time travelling to refuel your pump. The ePump solar water pump is a set and forget system – no electricity or batteries required.
It will pump both clean and dirty water efficiently and sustainably. Simply unpack and follow our easy instruction guide for a solution that is simple, reliable, cost effective and robust.
Assembly equipment | Quantity | Required | Supplied |
---|---|---|---|
2100mm posts 125mm x 125mm H5 treated piles | 5.00 | ✓ | |
1500mm posts 125mm x 125mm H5 treated piles | 5.00 | ✓ | |
150mm H3 timber 6 metre length | 2.00 | ✓ | |
Solar panels 300 watt 36 Volt | 6.00 | ✓ | |
21 metre Aluminium rail | 6.00 | ✓ | |
Bugle screw 14g x 100mm long (attaches 6x2 to posts plus rails mounts to 6x2) | 50.00 | ✓ | |
Rail mounts (rail feet) | 12.00 | ✓ | |
Interclamps GPTL-IC-FSO (Centre panel fastener) | 10.00 | ✓ | |
End clamps GPTL-EC-F40 (Eend panel fastener) | 4.00 | ✓ | |
Accessory pack Bugle bit, pkt cale ties, cable mounts, oil | 4.00 | ✓ | |
10 metre lead (positive female female) between isolator and pump | 1.00 | ✓ | |
10 metre lead (negative male male) between isolator and pump | 1.00 | ✓ | |
Isolating switch c/w pre-plugged loom (plugs diretcly to panels in parallel) | 1.00 | ✓ | |
Aluminium rail joiner | 4.00 | ✓ |
Priced from $12,495 + gst and freight, our ePump solar water pump in a box is a game changer.
The kitset includes a standalone, fully automatic solar pumping system that will pump water in even the remotest areas of your property. With this low voltage kitset you won’t need an electrician or builder for installation.
You will no longer need to spend time travelling to refuel your pump. The ePump solar water pump is a set and forget system – no electricity or batteries required.
It will pump both clean and dirty water efficiently and sustainably. Simply unpack and follow our easy instruction guide for a solution that is simple, reliable, cost effective and robust.
The Pump:
Davies B1 Displacement Pump (piston)
Tough, reliable, proven
The Motor:
Built in Italy. Continuously rated, brushed motor, c/w gearbox
Purpose built, smart (includes 10 minute start delay)
The Panels:
Each unit is 395W, 36v
Top grade (Tier 1) panel.
The ePumpNZ has been designed to be easy to install, with simple connections between the pump and the panels.
Installation follows 3 key steps:
1. Prepare the base for the panels and the pump
2. Install the panels and the pump
3. Connect the units, prime and start
The ePumpNZ has been designed to be easy to install, with simple connections between the pump and the panels.
Installation follows 3 key steps:
1. Prepare the base for the panels and the pump
2. Install the panels and the pump
3. Connect the units, prime and start
Like any pump, the ePumpNZ benefits from an annual service to look for wear and tear and check the oil. Brushes, leathers etc will need changing over time. The good news is you can get these parts from pretty much any pump provider/stockist.
The ePumpNZ comes with a 12 month warranty.
"Isaacs have lots of staff with different experiences meaning they are able to service all nature of issues we face in our homes and business. Huge commitment to rebuild post cyclone even when facing a rebuild of their own."
Joe Moffett / Moffett Orchards
"Isaacs’s have been supporting our business for the last 9 years. Tumu Timbers are a high volume manufacturing based business that requires minimisation of downtime and a high level of electrical support to ensure smooth operations. Isaacs offer a range of design and project management experience and they are always proactive in working with us to implement best value solutions with an emphasis on quality and safety.”
James Truman / General Manager - Tumu Timbers Ltd